[GreatFET] Updating cloned github GreatFet

[Carl Wall]

Done see if it is Ok

> ---------- Original Message ----------
> From: Dominic Spill <dominicgs at gmail.com>
> Date: September 18, 2018 at 11:12 AM
> 
> 
> On Tue, 18 Sep 2018 at 08:02, Carl Wall <cwall at bell.net> wrote:
> >
> > That is what I was hoping for,
> > would you need to add a "make clean" for a rebuild or would that clutter
> the
> > instructions up?
> 
> Good idea.  Do you want to add it?  I'm on my phone at gr-con and wiki
> editing is painful on mobile.
> 
> > > ---------- Original Message ----------
> > > From: Dominic Spill <dominicgs at gmail.com>
> > > Date: September 18, 2018 at 10:09 AM
> > >
> > >
> > > On Mon, 17 Sep 2018 at 05:15, Carl Wall <cwall at bell.net> wrote:
> > > >
> > > > Was wondering if
> > > >
> > >
> https://github.com/greatscottgadgets/greatfet/wiki/Getting-Started-with-Firmware-Development
> > > > could be updated with the proper procedure to update the local
> repository
> > > to
> > > > keep in step with code changes on github, since it pulls in other
> > > libraries.
> > >
> > > I've given it a bit of an update.  Could you take a look and let me
> know if
> > > that's what you were hoping for?
> > >
> > > > See the bus pirate is getting a refresh, moving to arm and the
> libopencm3
> > > > library
> > >
> > > Coincidentally, we're likely to be moving away from it in the next
> month or
> > > two.  GSG, subcontractors, and friends wrote almost all of the LPC43xx
> code
> > > in there and we've now received permission from all authors to move it
> to a
> > > new repo and re-license it with a BSD license.