[GreatFET] Updating cloned github GreatFet

[Carl Wall]

That is what I was hoping for,
would you need to add a "make clean" for a rebuild or would that clutter the
instructions up?


> ---------- Original Message ----------
> From: Dominic Spill <dominicgs at gmail.com>
> Date: September 18, 2018 at 10:09 AM
> 
> 
> On Mon, 17 Sep 2018 at 05:15, Carl Wall <cwall at bell.net> wrote:
> >
> > Was wondering if
> >
> https://github.com/greatscottgadgets/greatfet/wiki/Getting-Started-with-Firmware-Development
> > could be updated with the proper procedure to update the local repository
> to
> > keep in step with code changes on github, since it pulls in other
> libraries.
> 
> I've given it a bit of an update.  Could you take a look and let me know if
> that's what you were hoping for?
> 
> > See the bus pirate is getting a refresh, moving to arm and the libopencm3
> > library
> 
> Coincidentally, we're likely to be moving away from it in the next month or
> two.  GSG, subcontractors, and friends wrote almost all of the LPC43xx code
> in there and we've now received permission from all authors to move it to a
> new repo and re-license it with a BSD license.